Company Details

Shenzhen Hongfa Environmental Protection Equipment CO., LTD [Guangdong,China] Business Type:Manufacturer , Distributor/Wholesaler Main Markets: Worldwide Exporter:31% - 40% Certs:ISO14001, ISO9001, CE, RoHS

Language

Filter press usage specifications and operating instructions

2022-03-29

Some suggestions and details about the installation, operation and maintenance of the Filter Press

1.4.1.Specified number of Filter plates must be placed in order and It's forbiddenoperation using less Filter Plate.

1.4.2.The pressure of cylinder should not over the rated value, otherwise it will

damage the relevant parts of Filter press.

1.4.3.Valves of filtered liquid, washing liquid and compressed air must operate

according to the procedures and do not turn on at the same time.

1.4.4.The slurry temperature must be controlled under 80℃, if it's beyond 80℃,

please inform us in advance.

1.4.5.While moving the plates, the force should be even and appropriate to

avoid damage to plates and handles.

1.4.6.After filtration, plates and cloths must wash clean. There should no

residues on the surface, otherwise it might cause deformation.

1.4.7.The filter cloth must meet requirements of slurry, otherwise, the filtrate

will be not clear, or filtering speed will be too slow to get the best filtering effect.

1.4.8.After a period of working, the filter cloth will be hard and their

performance might decrease, so it's very necessary to conduct routine

inspection. If clothes become hard, please neutralize, immerse and wash them

using corresponding weak acid alkali.

1.4.9.Hydraulic parts, say, oil tank, cylinder, oil pump and relief valve etc.,

should perform some no-load running regularly. Normally, for the first use,

the oil should be changed in the one month. Then every 6 months the oil

should be changed one time. The filtering precision should be 20 um.

1.4.10.The structure should be clean and the screw part should be lubricated

with butter. The plate shifter and driving mechanism should keep smooth using

lubrication oil. Please do not climb and strike the pipes connecting with inlet

and outlet to avoid leakage at the joints

Previous: Plate and frame filter press Next: Automatic pull plate filter press installation

Ms. Ada

Email:

ada@hongfafilterpress.com

Send Inquiry

Tel:0086-13544177648

Fax:0755-81781055

Mobile Phone:+8613544177648

Email:ada@hongfafilterpress.com

Address:NO.3 Aoxiang Road, Zhangbei Second Village, Ailian, Longgang District, Shenzhen,, Shenzhen, Guangdong