The automatic pull plate Chamber Filter Press adopts PLC control system, automatic pressure maintenance, automatic pull plate unloading. The beam adopts rectangular bridge steel with good rigidity and good lateral bending resistance, which has the characteristics of convenient operation and reliable performance, and has a remote control interface.The main advantages of the automatic pull plate box Filter Press are high efficiency, good effect, and relatively durable Filter Plate (under the same conditions), but the degree of automation is high, and there is also an automatic device for cleaning the Filter cloth. Generally, it is necessary to replace the filter cloth. The frequency will not be frequent.
Under the pressure of the feeding pump, the material liquid to be filtered is sent into each filter chamber, and the solid and liquid are separated through the filter medium (select the appropriate filter cloth according to different industries). A filter residue is formed on the filter cloth until the filter chamber is filled to form a filter cake. The filtrate passes through the filter cloth and flows along the groove of the filter plate to the channel of the outlet hole below, where it is discharged in a concentrated manner. After the filtration is completed, the filter residue can be washed with clean water. After washing, sometimes compressed air is introduced to remove the remaining washing liquid. After the filtration, open the Filter press to remove the filter cake (the filter cake is stored between two adjacent filter plates), clean the filter cloth, and re-press the plate filter to start the next working cycle.
